Cisco IE 3010 Getting Started Guide

25
Cisco IE 3010 Switch Getting Started Guide
78-19582-02
Cisco IE 3010 Switch Getting Started Guide
Resetting the Switch to the Default Settings
Caution Resetting the switch deletes the configuration and restarts the switch.
1. Press and hold the Express Setup button for about 10 seconds. The switch
reboots. The system LED turns green after the switch completes rebooting.
2. Press the Express Setup button again for 3 seconds. A switch 10/100 Ethernet
port blinks green.
3. Follow Steps 6 to 13 in the “Running Express Setup” section on page 4.
Accessing Help Online
First look for a solution in the troubleshooting section of the switch hardware
installation guide or the switch software configuration guide on Cisco.com. You
can also use the Cisco Technical Support and Documentation site for a list of
known hardware problems and extensive troubleshooting documentation.
Obtaining Documentation and Submitting a
Service Request
For information on obtaining documentation, submitting a service request, and
gathering additional information, see the monthly What’s
New in Cisco Product
Documentation, which also lists all new and revised Cisco
technical
documentation:
http://www.cisco.com/en/US/docs/general/whatsnew/whatsnew.html
Subscribe to the What’s New in Cisco Product Documentation as a Really Simple
Syndication (RSS) feed and set content to be delivered directly to your desktop using
a reader application. The RSS feeds are a free service and Cisco currently supports
RSS version 2.0.

Cisco IE 3010 Specifications

General

Brand	Cisco
Model	IE 3010
Category	Switch
Language	English