Cisco Linksys RE1000 User Manual

11
Wireless-N Extender
Linksys RE1000 Chapter 2: Advanced Configuration
Administration > Diagnostics
Diagnostics
Ping Test
Ping checks whether the IP or URL address is reachable.
IP or URL Address Enter the IP or URL address you want
to test.
Packet Size Enter the packet size you want to send. The
default is 32 bytes.
Number to Ping Enter the number of times you wish to
test the connection. The default is 5.
Start Test To run the test, click this option. The Ping
screen shows if the test is successful. Click Close to return
to the Diagnostics screen. Click Stop to stop the test.
Diagnostics > Ping
Administration > Factory Defaults
The Factory Defaults screen allows you to restore the
Extender’s configuration to its factory default settings.
NOTE: Do not restore the factory defaults unless
you are having difficulties with the Extender
and have exhausted all other troubleshooting
measures. Once the Extender is reset, you
will have to re-enter all of your configuration
settings.
Administration > Factory Defaults
Factory Defaults
Restore Factory Defaults To reset the Extender’s settings
to the default values, click this option. Any settings you
have saved will be lost when the default values are restored.
Administration > Firmware Upgrade
The Firmware Upgrade screen allows you to upgrade the
Extender’s firmware. Do not upgrade the firmware unless
you are experiencing problems with the Extender or the
new firmware has a feature you want to use.
Administration > Firmware Upgrade
NOTE: The Extender may lose the settings
you have customized. Before you upgrade
its firmware, write down all of your custom
settings. After you upgrade its firmware, you
will have to re-enter all of your configuration
settings.
Firmware Upgrade
Before upgrading the firmware, download the
Extender’s firmware upgrade file from the website,
www.linksys.com/support.
Please select a file to upgrade Click Browse and select
the firmware upgrade file.
Start Upgrade After you have selected the appropriate
file, click this option, and f ollow the on-screen instructions.

Cisco Linksys RE1000 Specifications

General

Brand	Cisco
Model	Linksys RE1000
Category	Extender
Language	English