32
Appendix C: Upgrading Firmware
Wireless-B Ethernet Bridge
Appendix C: Upgrading Firmware
The Bridge’s firmware is upgraded with the firmware utility on the Linksys website at
http://linksys.com/download. Firmware should be upgraded ONLY if you experience problems with the Bridge.
1. Go to http://linksys.com/international.
2. Select your region.
3. Select the appropriate country.
4. Click the product’s tab.
5. Click Network Adapters.
6. Select WET11 - Wireless-B Ethernet Bridge.
7. Select Firmware.
8. Read the release notes or version information for the firmware version.
9. Click the word here in Click here to download the firmware file.
10. On the File Download screen, click Save to save the zip file to your computer.
11. Open the zip file and double-click the exe file.
12. The WET11 Firmware Upgrade utility will appear. Follow the on-screen instructions.
Note: Above instructions are based on the web pages layout when this
user guide was written. The web pages may be modified in the future.
To Next Page
Loading...
Need help?
General
