Cisco MX Series User Manual

Touch controller
When you start the system for the first time, the Setup assistant
starts automatically.
The Touch controller, and its use, is described in full detail in
the user guide for your video conference system.
Not all settings are available on all products; therefore the
touch buttons shown below may or may not be present on
your system.
Control the camera
and adjust self view
Make a call using
the dial pad
Make a call from your
directory or call history Share content
Adjust volume
Mute your
microphone
Here you can find:
• Proximity
• Do not disturb
• Settings menu
• Standby
See the list of upcoming
meetings Call your voice mail
Help desk
In-room controls
Cisco TelePresence Video Systems
D15318.02 Video Systems Getting Started Guide CE8.1, APRIL 2016. Copyright © 2016 Cisco Systems, Inc. All rights reserved. 10
Getting Started Guide
Introduction
User interfaces
Web interface
On-screen setup assistant
Appendices

Touch
User interfaces

Cisco MX Series Specifications

General

Brand	Cisco
Model	MX Series
Category	Conference System
Language	English