Provisioning set-up
(When using a provisioning system)
If in doubt for any of the parameters below, contact your provi-
sioning system provider.
See the administrator guide for your product, to find more
information about the individual provisioning settings.
Select provisioning infrastructure
1. Go to the Setup tab, and click Configuration.
2. Open the Provisioning settings from the left column.
3.
Select a provisioning infrastructure from the Mode drop
down list:
•
TMS – Cisco TelePresence Management System (Not avail-
able for SX10)
• VCS – Cisco Video Communication Server
• CUCM – Cisco Unified Communications Manager
•
Auto - The system starts provisioning by first trying VCS,
then TMS and finally CUCM.
• Edge - CUCM via Expressway
If you select Off, all configurations must be set manually.
Set the required provisioning parameters
Which parameters to set depend on which infrastructure was selected.
TMS
1.
It may be required to authenticate the video system with
Cisco TMS. If so, enter LoginName and Password in the
respective input fields.
2.
Enter the IP address or DNS name of the Cisco TMS server
in the Address input field under the ExternalManager
heading.*
3.
Enter the Path to the provisioning service in the corre-
sponding input field.
VCS
1.
It may be required to authenticate the video system with
the Cisco VCS. If so, enter LoginName and Password in the
respective input fields.
2.
Enter the IP address or DNS name of the Cisco VCS in the
Address input field under the ExternalManager heading.*
3.
Enter the SIP Domain for the Cisco VCS in the correspond-
ing input field.
Have a look at the Cisco VCS provisioning appendix for more
information about VCS provisioning.
Unified Communications Manager
Enter the IP address or DNS name of the CUCM provisioning
server in the Address input field under the ExternalManager
heading.*
You can find more details about setting up CUCM provisioning
in the Administering CE endpoints on CUCM guide.
CUCM via Expressway
Upon ordering the CUCM via Expressway service, you have
received a username, password, and domain name.
1. Enter the username in the LoginName input field.
2. Enter the password in the Password input field.
3.
Enter the domain name in the Domain input field under the
ExternalManager heading.
In some cases, you must manually enter the Expressway
address. Enter the address you have received upon ordering
in the Address input field under the ExternalManager heading.
* The DHCP server can be set up to provide the External Manager address
automatically (Option 242 for TMS; Option 150 for UCM). Any input set up
here overrides the setting provided by DHCP.
If you are changing a value setting,
you have to always click save to confirm the change.
Cisco TelePresence Video Systems
D15318.02 Video Systems Getting Started Guide CE8.1, APRIL 2016. Copyright © 2016 Cisco Systems, Inc. All rights reserved. 14
Getting Started Guide
On-screen setup assistant
To Next Page
Loading...
Need help?
General
