Cisco MX Series User Manual

About this guide
This document goes through the basic configuration of your
video conference system.
You can find the information about system assembly and instal-
lation in the Installation guide for your product.
Cisco TelePresence endpoints covered in this guide
• MX Series:
MX200 G2
MX300 G2
MX700
MX800
• SX Series:
SX10 Quick Set
SX20 Quick Set
SX80 Codec
NOTE: This guide doesn't cover information on Cisco Spark
registered systems. For more information on Cisco Spark room
systems, visit:
https://help.webex.com/community/cisco-cloud-collab-mgmt
User documentation
You can download the user documentation from the Cisco
web site, go to:
http://www.cisco.com/go/telepresence/docs
Guidelines for how to find the documentation on the Cisco web
site are included in the User documentation on the Cisco web
site appendix.
Software
You can download the software for your product from the
Cisco web site, go to:
http://www.cisco.com/cisco/software/navigator.html
Cisco contact
On our web site you can find an overview of the worldwide
Cisco contacts.
Go to:http://www.cisco.com/web/siteassets/contacts
Cisco TelePresence Video Systems
D15318.02 Video Systems Getting Started Guide CE8.1, APRIL 2016. Copyright © 2016 Cisco Systems, Inc. All rights reserved. 4
Getting Started Guide
Introduction
User interfaces
Web interface
On-screen setup assistant
Appendices

Touch
Introduction

Cisco MX Series Specifications

General

Brand	Cisco
Model	MX Series
Category	Conference System
Language	English