Cisco NCS 540 Series User Manual

Router# show bgp ipv6 labeled-unicast 2000:0:0:1c::/64
BGP routing table entry for 2000:0:0:1c::/64
Versions:
Process bRIB/RIB SendTblVer
Speaker 5033 5033
Local Label: 66313
Paths: (1 available, best #1)
Advertised to update-groups (with more than one peer):
0.1
Advertised to peers (in unique update groups):
13.13.13.13
Path #1: Received by speaker 0
Advertised to update-groups (with more than one peer):
0.1
Advertised to peers (in unique update groups):
13.13.13.13
201
66:1:2::2 from 66:1:2::2 (39.229.0.1)
Origin IGP, localpref 100, valid, external, best, group-best
Received Path ID 0, Local Path ID 0, version 5033
Origin-AS validity: not-found
Remote PE
Router# show bgp ipv6 labeled-unicast 2000:0:0:1c::/64
BGP routing table entry for 2000:0:0:1c::/64
Versions:
Process bRIB/RIB SendTblVer
Speaker 139679 139679
Paths: (1 available, best #1)
Advertised to update-groups (with more than one peer):
0.2
Path #1: Received by speaker 0
Advertised to update-groups (with more than one peer):
0.2
201
11.11.11.11 (metric 5) from 13.13.13.13 (11.11.11.11)
Received Label 66313
Origin IGP, localpref 100, valid, internal, best, group-best, labeled-unicast
Received Path ID 0, Local Path ID 0, version 139679
Originator: 11.11.11.11, Cluster list: 5.5.5.5
Configuring OSPFv3 as the Routing Protocol Between the PE
and CE Routers
Configuration Example
This example shows how to configure provider edge (PE)-to-customer edge (CE) routing sessions that use
Open Shortest Path First version 3 (OSPFv3).
Router#config
Router(config)#router ospfv3 7
Router(config-ospfv3)#nsr
Router(config-ospfv3)#router-id 10.200.1.7
Router(config-ospfv3)#vrf vrf1
Router(config-ospfv3-vrf)#area 7
Router(config-ospfv3-vrf-ar)#interface Loopback7
Router(config-ospfv3-vrf-ar-if)#!
Router(config-ospfv3-vrf-ar-if)#interface TenGigE0/0/0/3.7
Router(config-ospfv3-vrf-ar-if)#
L3VPN Configuration Guide for Cisco NCS 540 Series Routers, IOS XR Release 6.3.x
60
Implementing IPv6 VPN Provider Edge Transport over MPLS
Configuring OSPFv3 as the Routing Protocol Between the PE and CE Routers

Cisco NCS 540 Series Specifications

General

Brand	Cisco
Model	NCS 540 Series
Category	Network Router
Language	English