• Effect of damage on the installation
• Photos of the damaged shipping containers and damaged product
Step 3 For dual direction airflow switches, check to be sure that all of the fan and power supply modules have the same airflow
direction.
• Port-side intake airflow direction indicated with burgundy coloring
• Port-side exhaust airflow direction indicated with blue coloring
Installing the Chassis in a Four-Post Rack
This section describes the installation of the Cisco Nexus 9408 platform switch, into a four-post rack, using
the N9K-C9400-RMK rack-mount kit.
Before moving or lifting the chassis, follow these guidelines:
• Ensure that there is adequate space around the switch for servicing and airflow.
• Never attempt to lift an object that is too heavy for you to lift by yourself.
• Ensure that you have solid footing. Distribute the weight of the switch is evenly between your feet.
• Lift the switch slowly, keeping your back straight. Lift with your legs, not with your back. Bend at the
knees, not at the waist.
Statement 1030—Equipment Installation
Only trained and qualified personnel should be allowed to install, replace, or service this equipment.
Warning
Statement 1091—Installation by an Instructed Person
Only an instructed person or skilled person should be allowed to install, replace, or service this equipment.
See statement 1089 for the definition of an instructed or skilled person.
Warning
Statement 1032—Lifting the Chassis
To prevent personal injury or damage to the chassis, never attempt to lift or tilt the chassis using the handles
on modules, such as power supplies, fans, or cards. These types of handles are not designed to support the
weight of the unit.
Warning
Installing the Chassis
7
Installing the Chassis
Installing the Chassis in a Four-Post Rack
To Next Page
Loading...
Need help?
General