EasyManuals Logo
Home>Cisco>Network Router>RV320

Cisco RV320 User Manual

Cisco RV320
122 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #27 background imageLoading...
Page #27 background image
Setup
Setup Network
Cisco RV320/RV325 Administration Guide 27
3
IPv6 Rapid Deployment (6rd) Tunnel (IPv6)
Choose this option if your ISP uses 6rd Tunnel (IPv6 Rapid Deployment) to
establish Internet connections. Enter the settings provided by your ISP.
6rd Configuration Mode:
- Manual—Manually set 6rd Prefix, Relay IPv4 Address, and IPv4 Mask
Length as provided by your ISP.
- Auto (DHCP)—Use DHCP (option 212) to obtain 6rd Prefix, Relay IPv4
Address, and IPv4 Mask Length.
6rd Prefix—6rd Prefix for your ISP account.
Relay IPv4 Address—Relay IPv4 address for your ISP account.
IPv4 Mask Length—6rd IPv4 subnet mask length for your ISP account.
(Usually this value is 0.)
DNS Server 1 and DNS Server 2—IP addresses of the DNS servers.
Optionally, you can enter a second DNS server. The first available DNS
server is used.
LAN IPv6 AddressGlobal IPv6 prefix that was assigned by your ISP for
your LAN devices, if applicable. (Check with your ISP for more information.)
Prefix Length—IPv6 prefix length. The IPv6 network (subnetwork) is
identified by the initial bits of the address called the prefix. All hosts in the
network have the identical initial bits for their IPv6 address. Enter the
number of common initial bits in the network addresses. The default prefix
length is 64.
LAN Prefix Assignment
- Without any action—Does not provide Stateless or Stateful IPv6
address for LAN-side PCs.
- Configure to RA automatically—Provides Stateless IPv6 address for
LAN-side PCs.
- Configure to DHCPv6 automatically—Provides Stateful IPv6 address
for LAN-side PCs.
- Configure to RA and DHCPv6 automatically—Provides Stateless and
Stateful IPv6 addresses for LAN-side PCs.

Table of Contents

Other manuals for Cisco RV320

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cisco RV320 and is the answer not in the manual?

Cisco RV320 Specifications

General IconGeneral
Ethernet LANYes
Cabling technology10/100/1000Base-T(X)
Networking standardsIEEE 802.3, IEEE 802.3u
Ethernet LAN data rates10, 100, 1000 Mbit/s
Ethernet interface typeGigabit Ethernet
USB version2.0
USB ports quantity2
Ethernet LAN (RJ-45) ports6
Gigabit Ethernet (copper) ports quantity4
Routing protocolsRIP-1, RIP-2
Supported network protocolsIPv4, IPv6, Static IP, PPPoE, PPTP, DNS, DynDNS
VPN supportIPsec, L2TP, DPD, DNS
Firewall securityPort Address Translation (PAT) firewall, Stateful packet inspection (SPI) firewall, Network address translation (NAT) firewall
Security algorithms128-bit AES, 192-bit AES, 256-bit AES, 3DES, DES, HTTPS, MD5, SHA-1, SSL/TLS
VPN tunnels quantity25
Authentication methodSHA-1, MD5
MAC address filtering-
CertificationFCC, CE, UL, cUL, CB, CCC, BSMI, KC, Anatel
Storage temperature (T-T)0 - 70 °C
Operating temperature (T-T)0 - 40 °C
Storage relative humidity (H-H)5 - 90 %
Operating relative humidity (H-H)10 - 85 %
Product colorBlack
Rack mountingNo
LED indicatorsActivity, LAN, Link, Power, USB, WAN
Input current1.5 A
Output voltage12 V
Weight and Dimensions IconWeight and Dimensions
Depth44 mm
Width206 mm
Height132 mm
Weight- g

Related product manuals