CHAPTER
9-1
Cisco SCE8000 10GBE Installation and Configuration Guide
OL-26784-02
9
Removal and Replacement Procedures
Revised: December 21, 2012, OL-26784-02
Introduction
This chapter describes how to perform removal and replacement procedures for Cisco SCE 8000
platform field-replaceable units (FRUs).
Note Before you install, operate, or service the system, read Regulatory Compliance and Safety Information
for the Cisco SCE8000. This guide contains important safety information you should know before
working with the system.
This chapter contains the following sections:
• Safety, page 9-2
• Preventing Electrostatic Discharge Damage, page 9-3
• Supported Hardware, page 9-3
• Removing and Replacing the Power Supply, page 9-4
• Removing and Replacing the Fan Assembly, page 9-13
• Removing and Replacing Modules, page 9-15
• Removing and Replacing Shared Port Adapters, page 9-29
• Removing and Replacing the Optical Bypass Module, page 9-34
To Next Page
Need help?
General
