Cisco Service Manual Service Manual

D14908.02 SX20 Administrator Guide TC6.0, JANUARY 2013. www.cisco.com — Copyright © 2012-2013 Cisco Systems, Inc. All rights reserved.
12
Cisco TelePresence SX20 Quick Set Administrator Guide
Changing the system password
We strongly recommend that you set a password
for any user with ADMIN rights, including the default
admin user, to restrict access to system configuration.
You can read more about password protection in the
► Setting passwords chapter.
1. Open the Change Password dialog
Hover the mouse over your user name, and
choose Change password in the drop-down list.
2. Set the new password
Enter your current and new passwords as
requested, and click Change password for the
change to take effect.
If the password currently is not set, leave
the Current password field blank.
Contents
Introduction
Web interface
System settings
Setting passwords
Appendices
Web interface

Cisco Service Manual Specifications

General

Brand	Cisco
Model	Service Manual
Category	Conference System
Language	English