Cisco SG 300-10 User Manual

300 Series Managed Switches 2
Welcome
Thank you for choosing the Cisco 300 Series Managed Switch, a Cisco
Small Business network communications device. This device is designed
to be operational right out of the box as a standard bridge. In the default
configuration, it will forward packets between connecting devices after
power up.
Package Contents
• Cisco SF 300-08, SF 302-08, SF 302-08MP, SF 302-08P, SG 300-10,
SG 300-10MP, SG 300-10P, SG 300-20, SF 300-24, SF 300-24P, SG
300-28, SG 300-28P, SF 300-48, SF 300-48P, or SG 300-52 Managed
Switch
• Rackmount Kit
• Power Cord (power adapter included with 8-port devices)
• This Quick Start Guide
• Product CD
• Serial Cable
This guide will familiarize you with the layout of the managed switch and
describe how to deploy the device in your network. For additional
information, see www.cisco.com/smb.
Mounting the Cisco Switch
There are three ways to physically install the switch:
• Set the switch on a flat surface.
• Mount the switch on a wall (8-port devices only).
• Mount the switch in a standard rack (1 rack unit high).
Do not deploy the device in a location where any of the following
conditions exist:
High Ambient Temperature—The ambient temperature must not
exceed 104 degrees Fahrenheit (40 degrees Centigrade).
Reduced Air Flow—Both side panels must be unobstructed to prevent
overheating.
Mechanical Overloading—The device should be level, stable, and
secure to prevent it from sliding or shifting out of position.
1

Cisco SG 300-10 Specifications

General

Brand	Cisco
Model	SG 300-10
Category	Switch
Language	English