50
Chapter 5: Web Utility Configuration
Overview
Linksys One Ready Communications Solution
Chapter
5
Web Utility Configuration
Overview
The Linksys Switch provides a complete web-based utility to configure the Ethernet switch.
This utility is accessible through your web browser.
Use the navigation window, located on the left side of the web-based utility, to view various
functions of the Ethernet switch.
Accessing the Web-based Utility
To access the web-based utility, enter the IP address of the Ethernet switch to the address field
of your web browser. For example: type http://192.168.100.20 or
https://192.168.100.20 if the IP address of the Ethernet switch is 192.168.100.20. The IP
address of the Ethernet switch is determined by DHCP, so you’ll need to find its address using
the Console configuration or the Linksys One Administrator screen.
If your Ethernet switch is part of a Linksys One system, the easiest way to manage it is with
the Linksys One Portal — available only on the Linksys One Services Router. Refer to the
Customer Premises Equipment Administration Guide for more details on the Linksys One
Portal.
Viewing Online Help
The Web Utility has complete online help functionality for each screen. To access on-line help
for a particular screen, click on the Help button located on the right side of the screen.
NOTE: The Ethernet switch is setup by
default to obtain its IP address via DHCP
on the default VLAN 100.
To Next Page
Loading...
Need help?
General
