D1534509 Cisco TelePresence User Guide
Systems using Touch10
Produced: March 2018 for CE9.3
All contents © 2010–2018
Cisco Systems, Inc. All rights reserved
37
Camera
Systems with SpeakerTrack may
include the Presenter preset.
This preset must have been
implemented by your video support
team to work.
PresenterTrack enables the camera
to zoom in and track a presenter
who is moving about the stage
presenting. The stage zone will have
been dened by your video support
team.
Once the presenter leaves the stage
the tracking is brought to a hault.
The procedure for setting this up
and the products supporting this
feature can be found in the CE9.2
Administrator Guide for our room
systems and codecs.
About Presenter Tracking
Presenter Track
To enable Presenter Tracking, tap Camera, in
the upper right corner.
Systems with PresenterTrack enabled will
have this as a camera preset, as shown.
Be aware that camera presets will not be
accessible if Speaker Tracking has been
activated (see the previous page for more on
this).
1 2
3
Tap anywhere outside the menu to exit.
To deactivate Presenter Track, press the preset
again.
To Next Page
Loading...
Need help?
General
