EasyManuals Logo
Home>Cisco>Server>UCS C200 M2

Cisco UCS C200 M2 User Manual

Cisco UCS C200 M2
60 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #40 background imageLoading...
Page #40 background image
Cisco UCS C200 M2 High-Density SFF Drive Rack-Mount Server
40
CONFIGURING the SERVER
Unified Computing Drive Retention Service
With the Cisco Unified Computing Drive Retention (UCDR) Service, you can obtain a new disk
drive in exchange for a faulty drive without returning the faulty drive. In exchange for a Cisco
replacement drive, you provide a signed Certificate of Destruction (CoD) confirming that the
drive has been removed from the system listed, is no longer in service, and has been destroyed.
Sophisticated data recovery techniques have made classified, proprietary, and confidential
information vulnerable, even on malfunctioning disk drives. The UCDR service enables you to
retain your drives and ensures that the sensitive data on those drives is not compromised, which
reduces the risk of any potential liabilities. This service also enables you to comply with
regulatory, local, and federal requirements.
If your company has a need to control confidential, classified, sensitive, or proprietary data, you
might want to consider one of the Drive Retention Services listed in
Table 21.
NOTE: Cisco does not offer a certified drive destruction service as part of this
service.
Table 21 Drive Retention Service Options
Service Description
Service Program
Name
Service
Level GSP
Service Level Product ID (PID)
UCS Mission Critical
Support Service
With Drive
Retention
UC CRIT DR UCMD7 24x7x4 Onsite CON-UCMD7-R200WSFF
UCMD8 24x7x2 Onsite CON-UCMD8-R200WSFF
UCS Support
Service With Drive
Retention
UC SUPP DR UCSD1 8x5xNBD CON-UCSD1-R200WSFF
UCSD2 8x5x4 CON-UCSD2-R200WSFF
UCSD3 24x7x4 CON-UCSD3-R200WSFF
UCSD4 24x7x2 CON-UCSD4-R200WSFF
UCSD5 8x5xNBD Onsite CON-UCSD5-R200WSFF
UCSD6 8x5x4 Onsite CON-UCSD6-R200WSFF
UCSD7 24x7x4 Onsite CON-UCSD7-R200WSFF
UCSD8 24x7x2 Onsite CON-UCSD8-R200WSFF

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cisco UCS C200 M2 and is the answer not in the manual?

Cisco UCS C200 M2 Specifications

General IconGeneral
Tcase76 °C
Bus typeQPI
SteppingD0
FSB ParityNo
Processor codeSLBF8
Processor cache4 MB
Processor cores4
Processor modelE5506
System bus rate4.8 GT/s
Processor seriesIntel Xeon 5500 Series
Processor socketSocket B (LGA 1366)
Processor codenameNehalem EP
Motherboard chipset-
Processor frequency2.13 GHz
Processor cache typeSmart Cache
Processor lithography45 nm
Processor system typeDP
Processor manufacturerIntel
Processor package size42.5 x 45 mm
Processor front side bus- MHz
Processor operating modes64-bit
ECC supported by processorYes
Thermal Design Power (TDP)80 W
Number of processors installed1
CPU multiplier (bus/core ratio)16
Maximum number of SMP processors2
Memory types supported by processorDDR3-SDRAM
Memory channels supported by processorTriple
Memory clock speeds supported by processor800 MHz
Memory bandwidth supported by processor (max)19.2 GB/s
Maximum internal memory supported by processor144 GB
HDD size- \
RAID levels0, 1
Optical drive typeDVD-RW
Total storage capacity0 GB
Maximum storage capacity0 TB
Number of HDDs installed0
Internal memory4 GB
Maximum internal memory96 GB
Memory layout (slots x size)1 x 4 GB
Graphics cardG200
Networking featuresGigabit Ethernet
USB 2.0 ports quantityUSB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Power supply650 W
Power requirementsAC 120/230 V, 50/60 Hz
Chassis typeRack (1U)
Processor ARK ID37096
Weight and Dimensions IconWeight and Dimensions
Depth706.1 mm
Width429.3 mm
Height43 mm

Related product manuals