•
cmterm-7975-sccp.9-3-1SR2-1-readme.html
•
cmterm-7975-sip.9-3-1SR2-1-readme.html
Step 8
Follow the instructions in the readme file to install the firmware.
Cisco Unified IP Phone Expansion Module firmware installation
The following sections describe the Cisco Unified IP Phone Expansion Module firmware installation.
Cisco Unified IP Phone Expansion Module 7914 installation
This section describes how to install Cisco Unified IP Phone Expansion Module 7914.
Cisco Unified IP Phone Expansion Module 7914 firmware upgrade issues
The Cisco Unified IP Phones 7906G, 7911G, 7941G, 7941G-GE, 7942G, and 7945G, do not support the
Cisco Unified IP Phone Expansion Module 7914.
You can add a maximum of two Expansion Modules to the Cisco Unified IP Phones 7961G, 7961G-GE,
7965G, 7970G, 7971G, and 7975G.
The filename for Cisco Unified IP Phone Expansion Module 7914 indicates that it is for use with SCCP;
however, it supports both SCCP and SIP. This applies to IP Phones using Cisco Unified Communications
Manager 7.0.
If you are using the Cisco Unified IP Phone Expansion Module 7914, you must upgrade the expansion module
to firmware release S00105000400 before using the phone to support relevant features on your expansion
module.
Install Cisco Unified IP Phone Expansion Module 7914 firmware
To download and install the firmware, perform these steps:
Procedure
Step 1
Go to the following URL:
http://www.cisco.com/cisco/software/navigator.html?mdfid=269065653&i=rm
Step 2
Log in to the Tools and Resources Download page.
Step 3
Choose the IP Telephony folder by clicking +.
Step 4
Choose IP Phones > Cisco Unified IP Phones 7900 Series.
Step 5
Choose Cisco Unified IP Phone Expansion Module 7914.
Step 6
Choose Skinny Client Control Protocol (SCCP) Software.
Step 7
Choose 5.0(4) under the Latest Releases folder.
Step 8
To download the firmware for Cisco Unified IP Phone Expansion Module 7914, click the Download Now
or Add to cart button and follow the prompts:
Cisco Unified IP Phone 7900 Series Release Notes for Firmware Release 9.3(1)SR2
8
Cisco Unified IP Phone 7900 Series Release Notes for Firmware Release 9.3(1)SR2
Cisco Unified IP Phone Expansion Module firmware installation
To Next Page
Loading...
Need help?
General