EasyManuals Logo
Home>Cisco>Wireless Access Point>WAP125

Cisco WAP125 User Manual

Cisco WAP125
13 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #2 background imageLoading...
Page #2 background image
2 Cisco WAP125 Quick Start Guide
Package Contents
Wireless Access Point
Power Adapter
This Quick Start Guide
Ethernet Cable
Technical Support Contact
Pointer Card China RoHS
EU Directives 1999/5/EC Compliance Information (for EU SKU only)
1 Before You Begin
Before you begin the installation, make sure that you have the following equipment
and services:
A computer with one of the following browser support:
Internet Explorer 9.0 or later
A recent version of either Chrome, Firefox or Safari
Tools for installing the hardware
FindIT tool for locating the access point
One or more Ethernet network switches with PoE
Mobile devices (iPhone, Android, etc.) via wireless setup SSID. (Configure via
Wi-Fi mobile device with a web browser.)
2 Cisco WAP125 Features
Front Panel
The front panel of the Cisco WAP125 consists of one system LED. For full
descriptions of the colors of the lights and their indications, see Verifying the
Hardware Installation.
Back Panel
RESET—See Rebooting the Cisco WAP125 or Resetting to Factory Defaults for
information on the RESET button.
LAN (PoE)—The RJ-45 Ethernet port is used to power the Cisco WAP125 using PoE.
It is an auto-sensing, Gigabit Ethernet (802.3) port used to connect the Cisco

Other manuals for Cisco WAP125

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cisco WAP125 and is the answer not in the manual?

Cisco WAP125 Specifications

General IconGeneral
2.4 GHzYes
MIMO typeMulti User MIMO
Modulation16-QAM, 64-QAM, 256-QAM, BPSK, CCK, QPSK
Number of users64 user(s)
Networking standardsIEEE 802.3af, IEEE 802.11ac
Spread spectrum methodDSSS, OFDM
Ethernet LAN data rates10, 100, 1000 Mbit/s
Maximum data transfer rate867 Mbit/s
Security algorithmsWPA, WPA2
Number of SSID supported8
Supported network protocolsIPv6, NTP, HTTP, HTTPS
USB 2.0 ports quantity0
Ethernet LAN (RJ-45) ports1
Output current1 A
Output voltage12 V
Power plug typeType C
AC input voltage100 - 240 V
AC input frequency50 Hz
PlacementDesk
CertificationUL 60950-1, CAN/CSA-C22.2 No. 60950-1, IEC 60950-1, EN 60950-1, FCC 15.247, 15.407; RSS-210; EN 300.328, EN 301.893; AS/NZS 4268.2003; FCC 15.107 15.109, ICES-003, EN 301.489-1 -17
Product colorWhite
Recommended usageIndoor
Cable lock slot typeKensington
Antenna typeInternal
Antenna gain level (max)5.63 dBi
Flash memory128 MB
Internal memory256 MB
Operating system installedLinux
Storage temperature (T-T)-20 - 70 °C
Operating temperature (T-T)0 - 40 °C
Storage relative humidity (H-H)5 - 90 %
Operating relative humidity (H-H)10 - 85 %
Country of originChina
Quantity per pack1 pc(s)
Package depth188.976 mm
Package width168.91 mm
Package height80.01 mm
Package weight1133.98 g
Weight and Dimensions IconWeight and Dimensions
Width123.19 mm
Height31.75 mm
Weight303.91 g

Related product manuals