Cisco WAP125 Quick Start Guide 2
link to the Administration Guide is found in To reset the device to factory default
settings:, page11.
Package Contents
• Wireless Access Point
• Mounting kit
• This Quick Start Guide
• Ethernet cable
• Pointer Card with China RoHS
• Technical Support Contacts
• EU Directives 1999/5/EC Compliance Information (for EU SKU only)
1 Before You Begin
Before you begin the installation, make sure that you have the following equipment
and services:
• A computer with one of the following browser support:
– Internet Explorer 9.0 or later
– A recent version of either Chrome, Firefox or Safari
• Tools for installing the hardware
• One or more Ethernet network switches with either PoE, PoE injector or
external power adapter
2 Cisco WAP581 Wireless-AC/N Premium Dual
Radio Access Point with PoE Setup Features
Front Panel
The front panel of the device consists of a single system LED. For a full description
of the colors of the light and its indications, see Verifying the Hardware
Installation, page 6.
Back Panel
The back panel of the device has two RJ-45 Ethernet ports. Facing the back of the
device, the right port (labeled “ETH0/PD”) is an 2.5GbE with 802.3at & 802.3af
To Next Page
Loading...
Need help?
General
