5
Cisco WRP500 Wireless-AC Broadband Router with 2 Phone Ports Quick Start Guide
Cisco WRP500 Wireless-AC Broadband Router with 2 Phone Ports Quick Start Guide
Install the Cisco WRP500
Install the Cisco WRP500
You can place the Cisco WRP500 on a desktop or mount it on a wall.
Caution To prevent the WRP500 from overheating, do not operate it in an area that exceeds
an ambient temperature of 104°F (40°C).
Desktop Placement
The WRP500 has four rubber feet on the bottom panel. Place the WRP500 on a
level surface near an electrical outlet.
Warning
Do not place anything on top of the WRP500; excessive weight could damage it.
Wall Mounting
The WRP500 has two wall-mount slots on the bottom panel. To mount the
WRP500 on a wall, you need mounting hardware (not included). Suggested
hardware is illustrated (not true to scale).
Recommended hardware (not included): Two number-six pan-head tapping
screws, 5/8-in. (15.8-mm) length, with anchors for sheet rock installation.
5/8 in. (15.8 mm)
Warning
Insecure mounting might damage the WRP500 or cause injury. Cisco is not
responsible for damages incurred by insecure wall mounting.
To mount the unit on the wall:
Step 1 Determine where you want to mount the unit. Verify that the surface is smooth,
flat, dry, and sturdy.
To Next Page
Loading...
Need help?
General
