243
INJECTION
SAFETY REQUIREMENTS: HDi DIRECT INJECTION SYSTEM
Engines: HDi ALL TYPES
SAFETY REQUIREMENTS.
Preamble.
All interventions on the injection system must be carried out to conform with the following requirements and regulations:
- Competent health authorities.
- Accident prevention.
- Environmental protection.
WARNING: Repairs must be carried out by specialised personnel informed of the safety requirements and of the precautions to be taken.
Safety requirements.
IMPERATIVE: Take into account the very high pressures in the high pressure fuel circuit (1350 bars), and respect the requirements below:
- No smoking in proximity to the high pressure circuit when work is being carried out.
- Avoid working close to flame or sparks.
Engine running:
- Do not work on the high pressure fuel circuit.
- Always stay clear of the trajectory of any possible jet of fuel, which could cause serious injuries.
- Do not place your hand close to any leak in the high pressure fuel circuit.
After the engine has stopped, wait
30 seconds before any intervention.
NOTE: This waiting time is necessary in order to allow the high pressure fuel circuit to return to atmospheric pressure.
To Next Page
Loading...
Need help?
General
