208
Touch screen BLUETOOTH audio system
Once connected in Streaming mode, the
smartphone is considered to be a media
source.
Connecting Apple
®
players
Connect the Apple
®
player to the USB socket
using a suitable cable (not supplied).
Play starts automatically.
Control is via the audio system.
The classications available are those of
the portable device connected (artists/
albums/genres/playlists/audio books/
podcasts). It is also possible to use a
classication structured in the form of a
library.
The default classication used is by artist. To
modify the classication used, return to the
rst level of the menu then select the desired
classication (playlists for example) and
conrm to go down through the menu to the
desired track.
The version of software in the audio system may
not be compatible with the generation of the
Apple
®
player.
Media settings
Press the "Media Settings" button.
Activate/deactivate track playback options and
access the audio settings.
The audio settings are the same as the
audio settings for the radio. For more
information on the "Audio settings", refer to
the corresponding section.
Information and advice
The system supports USB mass storage
devices, BlackBerry
®
devices or Apple
®
players
via the USB ports. The adapter cable is not
supplied.
Devices are managed using the audio system
controls.
Other devices, not recognised on connection,
must be connected to the auxiliary socket using
a jack cable (not supplied) or via Bluetooth
streaming, if compatible.
To protect the system, do not use a USB
hub.
The audio system will only play audio les with
".wav", ".wma", ".aac", ".mp3", ".mp4", ".m4a",
".ac", ".ogg" le extensions and with a bit rate
of between 32 Kbps and 320 Kbps (300 Kbps
maximum for ".ac" les).
It also supports VBR (Variable Bit Rate) mode.
All ".wma" les must be standard WMA 9 les.
The supported sampling rates are 11, 22, 44 and
48 KHz.
To avoid reading and display problems, we
recommend choosing le names less than 20
characters long that do not contain any special
characters (e.g. “ ? . ; ù).
Use only USB memory sticks in FAT or FAT32
format (File Allocation Table).
We recommend using the original USB
cable for the portable device.
Telephone
Pairing a Bluetooth
®
telephone
Up to 10 phones can be paired to the system.
Activate the Bluetooth function on the telephone
beforehand and ensure that it is "visible to all"
(telephone conguration).
To complete the pairing, whichever procedure is
used (from the telephone or from the system),
ensure that the code is the same in the system
and in the telephone.
The services available depend on the
network, the SIM card and the
compatibility of the Bluetooth devices used.
Check for services availability in the phone's
manual and with the operator.
The proles compatible with the system
are: HFP, OPP, PBAP, DID, A2DP,
AVRCP, SPP and PAN.
Go to the Brand's website for more information
(compatibility, additional help, etc.).