CITROEN DS5 User Manual

219
Practical information
Changing a fuse
Procedure for replacing a failed fuse with a new fuse to rectify a failure of the corresponding function.
The fuse extraction tweezer is fitted to the back
of the dashboard fusebox cover.
For access to it:
 remove the cover completely,
 remove the tweezer.
Access to tooling
Before changing a fuse, the cause
of the failure must be identified and
rectified.
 Identify the failed fuse by checking
the condition of its filament.
Changing a fuse
Good Failed
 Use the special tweezer to extract the fuse
from its housing.
 Always replace the failed fuse with a fuse
of the same rating.
 Check that the number marked on the
fusebox, the rating marked on the fuse and
the following tables all agree.
CITROËN will not accept responsibility
for the cost incurred in repairing your
vehicle or for rectifying malfunctions
resulting from the installation of
accessories not supplied and not
recommended by CITROËN and
not installed in accordance with its
instructions, in particular when the
combined consumption of all of the
additional equipment connected
exceeds 10 milliamperes.
Installing electrical
accessories
Your vehicle's electrical system is
designed to operate with standard or
optional equipment.
Before installing other electrical
equipment or accessories on your
vehicle, contact a CITROËN dealer
or a qualified workshop.

CITROEN DS5 Specifications

General

Brand	CITROEN
Model	DS5
Category	Automobile
Language	English