16
Metal Detector and Stop Rock
A metal detector is installed in the bottom
roller of the feeder unit.
When a sudden instance of magnetic
metal is fed into the feeder unit, the feeder
unit stops before the metal can enter the
chopping cylinder.
The sensitivity can be adjusted in the cab
using CEBIS.
Sensitivity Adjustment: 1 > 5
It is not possible to switch off the metal
detector.
The sensitivity can be adjusted from the
cab using CEBIS.
Sensitivity Adjustment: 0 > 10
It is recommended to deactivate
Stop Rock when harvesting maize,
using sensitivity setting 0.
Stop Rock, is used to detect stones
entering the feed rollers by monitoring the
movement of the upper precompression
rollers.
A sudden movement of the feed rollers
indicates a foreign object, the machine will
then stop the feed rollers similar to a
metal detection.
When the metal detector
DIRECTSTOP function is activated
in CEBIS, the machine’s forward
motion will stop automatically if the
metal detector or stone detector
detects a foreign object.
This function can be activated and
deactivated through CEBIS as is
required.
To Next Page
Loading...
Need help?
General
