DISC Player
Problem
Cause Measure
Another disc is already loaded.
Eject the disc before loading the new
Disc cannot be
one.
loaded.
There is a foreign matter already
in place.
Eject the foreign matter forcibly.
Compact disc is dirty. Clean the compact disc with a soft cloth.
Sound skips or is
noisy.
Compact disc is heavily scratched Replace with a compact disc with no
or warped. scratches.
Sound is bad
Water droplets
may
form on the
Let dry for about 1 hour with the power
directly after
power
internal lens when the car is
is turned on. parked in a humid place.
on.
If an error occurs, one of the following displays is displayed.
Take the measures described below to solve the problem.
Display
Cause Measure
Disc is inserted incorrectly. Eject the disc then reload it properly.
ERROR
3
The
disc fomat is not supported. Try another disc.
ERROR 5
This is a failure of deck's mechanism.
Consult your store of purchase.
If an error display other than the ones described above appears, press the Reset button. If the
problem persists, turn off the power and consult your store
of
purchase.
* When the Reset button is pressed, frequencies of radio stations, titles, etc. stored
in
memory
are cleared.
16
CZ100
To Next Page
Loading...
Need help?
General
