Remove the DCP
The control panel can be detached to prevent
theft. When detaching the control panel, keep
it in the safety place and prevent scratches.
We
recommend
taking
the
DCP
with
you
when leaving the car.
1.
Press the [
<.!)
] button
(2
sec.) to
tu
rn
off
the power.
2.
Deeply push in [OPEN] button to
unlock
the DCP.
3.
Hold
the
side
popped
out,
take
off
the
DCP.
Re-attach the DCP
1.
Hold the DCP and ensure that the panel
faces towards you. Set the right side
of
the
DCP into the DCP bracket.
2.
Press the left side of the DCP until it locks.
A CAUTION
• The DCP can easily be damaged by shocks. After removing it, be carefully not to drop it or
subject it to strong shocks.
• Once the [OPEN] button is pressed and DCP is unlocked, car vibrations can cause the DCP to
fall.
•
The
connector connecting the source unit and the DCP is an extremely important part. Be
careful not
to
damage it by pressing on it with fingernails, screwdrivers, etc.
Note:
If the DCP is dirty, wipe off the dirt with a soft, dry cloth only.
CZ100
5
To Next Page
Loading...
Need help?
General
