Clarion DRB3475 User Manual

5. TROUBLESHOOTING
Symptom Cause
Mniun
Power does not switch on.
(There is no sound
produced.)
The fuse has blown.
Replace the fuse with one of the same rating. If the
fuse blows again, contact your store of purchase.
Wiring is incomplete.
Read the attached “InstallatiorVWire Connection Guide’
once again and wire properly.
The compact disc does not
enter.
There is already a
compact disc inside the
disc insertion slot.
Eject the compact disc and then insert another one
The compact disc soon
comes out again.
The compact disc has been
inserted upside down.
Insert the compact disc with the labeled side facing up.
Sound skipping noise and
other noise is heard,
The compact disc is dirty
Wipe the compact disc with a soft cloth.
The compact disc is severely
scratched or warped.
Replace the compact disc with one that is in good
condition.
The sound is poor
immediately after
switching on the power.
When the car is parked in
a humid place, dew might
form on the internal lens.
Turn the unit on and wait for about 1 hour before
operating
■ To protect the system, this unit has been equipped with seif diagnostic functions. If a fault
arises, a warning is issued by various error displays. Follow the corrective measures and
remove the fault ____
Error Display
Corrective Measures
Er 5
This error display indicates that a fault has arisen in the mechanism of
the source unit (tor example, the disc cannot be changed or ejected).
- ♦ Check the source unit.
Er 3
This error display indicates that the pickup focus is off because of a
scratched disc or some other factor during the source unit play.
•*Check the compact disc.
^ “6. HANDLING COMPACT DISCS" and “7. SPECIFICATIONS" can be found on the reverse side of
this page.

Clarion DRB3475 Specifications

General

Brand	Clarion
Model	DRB3475
Category	CD Player
Language	English