Clarion M309 User Manual

SIRIUS Satellite Radio Operations
English
19 M309
Receiving stations selected by
category
Satellite Radio allows you to select broadcast
channel category (contents).
1. Press and hold the [BND] button (1 sec.) to
select the category selection mode.
∗ It press and hold once again, return to the
channel selection mode.
2. Press the [ ] or [ ] button to change the
category item.
3. Press the [x] or [v] button to tune in a
station.
∗ If press and hold the [x] or [v] button, it
will quick tune a channel a channel in the
current category.
∗ If press the [ ] or [ ] button, it will tune the
first channel in the next or last category.
Notes:
• When the category selection mode is entered,
the category of the last received channel is
displayed first.
• If no operation is perfomed within 10 seconds,
the category selection mode is canceled, and
resumes to the channel mode.
Presetting a category
A category can be preset by registering specific
categories in [DIRECT] buttons 1 to 6. Then the
desired category can be recalled by pressing
the corresponding [DIRECT] button.
1. Press and hold the [BND] button (1 sec.) to
enter the category mode.
2. Press the [ ] or [ ]
button to select a
category.
3. Press and hold one of the [DIRECT] buttons
for 2 seconds or longer to store the current
category into preset memory.
Notes:
• When the name of a channel stored in memory is
changed by a broadcasting channel, the display
may show a channel name that differs from the
stored name.
• A channel stored in memory may be
discontinued at the option of the broadcasting
channel.
• If no operation is performed for more than 1
second, category seek tuning can automatically
tune in a receivable broadcast channel category.
Scan function
There are two scan modes: the category scan
mode and the preset scan mode.
During scanning channels are displayed in
abbreviated form, the display mode cannot be
switched.
● Preset scan (PRESET SCN)
A preset scan scans the channels (up to 18
channels) stored in the preset memory about
every 10 seconds.
∗ This function is available in the channel selection
mode.
Press the [ ] button. And start the preset
scanning.
● Category scan (CAT SCN)
In a category scan, broadcast channels in the
same category as the current channel are
selected about every 10 seconds.
∗ This function is available in the category selection
mode.
Press the [ ] button. And start the category
scanning.
Note:
• Category scanning is not available when no
category is defined for the current channel.
Parental Lock function
This fuction allows you to set a listening
limitation level.
This setting is possible only when a password is
entered.
● Setting the Password
∗ The factory default setting is “0000”.
1. Press and hold the [DISP] button.
2. Press the [x] or [v] button to select
“PARENTAL PASSWORD”.
3. Press the [ ] button.
4. Input the old password.
4-1. Press the [x] or [v] button to move
the cursor.
4-2. Press the [ ] or [ ] button to select a
number.
4-3. Press and hold the [ ] button.
5. Input a new password.
Repeat step 4-1 to 4-3.
6. Input the new password again.
Repeat step 4-1 to 4-3.
M309_ENG.book Page 19 Monday, February 23, 2009 3:04 PM

Clarion M309 Specifications

General

Brand	Clarion
Model	M309
Category	Marine Equipment
Language	English