22 NX404E
English
Listening to the Tuner
1. Touch the Tuner button on the Main menu display. The tuner mode screen is
displayed.
2.Touchthe[FM1/FM2/FM3/AM]buttontoselecttheradioband.Eachtimethebutton
istouched,theradioreceptionbandchangesinthefollowingorder:FM1->FM2-
>FM3->AM->FM1...
13
12
7
11
8
9
10
2
3
4
6
5
1
1-PresetScanbutton
2-SeekDown
3-SeekUp
4-StepDown
5-StepUp
6-Frequenciesdisplay
7. System time
8-Bluetoothstatusindicator
9-Presetlist
10-DX/Localindicator
11-Bandbutton
12-Shortcutbutton
13-Optionbutton
Seek Tuning
1.Touchthe[FM1/2/3/AM]buttontoselecttheradioband(FMorAM).
2. Touch the [
] or [
] button
• WhenTouchthe[
] button, the station is searched in the direction of higher
frequency.
• WhenTouchthe[
] button, the station is searched in the direction of lower
frequency.
Step Tuning
1.Touchthe[FM1/2/3/AM]buttontoselecttheradioband(FMorAM).
2. Touch the [
] or [
] button in frequency menu to tune up or down by one step.
Recalling a preset station
1. Touch the [FM1/2/3/AM] button to select the desire band (FM or AM) on the tuner.
2. Touch the preset station (1 to 6) on Preset list.
Manual memory
1. Touch the desired band button to select the band you wish to store.
2. Tune to a station you want to store using the seek tuning, step tuning, or preset
tuning.
3. Touch and hold the desired Preset button you want to store for about 2 seconds.
Auto Store
The Auto Store is a function for storing up to 6 stations that are automatically searched
in sequentially. If the number of receivable stations cannot reach to 6, the previous
stored station remains.
1. Touch the [FM1/2/3/AM] button to select the desired band. (FM or AM)
2. Touch the [
] button, and then touch the [
] button to start the Auto Store.
A beep sounds and the stations with good reception are stored automatically to the
preset list.
Notes:
1.Afterautostore,thepreviousstoredstationswillbeoverwritten.
2.Theunithas4bands,butFM3andAMcanstorebyAutoStorefunction.
12. TUNER
OPERATIONS
NX404E_QSG 20131205_EN.indd 22 2014-2-12 12:01:18