50
NX405
English
English
Owner’s Manual
English
Owner’s Manual
18. AUX
External peripheral devices, including a game console, camcorder, navigation unit, iPod/iPhone, etc. can be
connected to the AUX connector on the front or back of this unit using the A/V media cables.
Switching to AUX IN
Touch [AUX1] /[AUX2] button on Main Menu to select desired mode (when unit is reading). If the external device
connected to AUX input have audio signal, the unit will broadcast audio of external device. Press Menu button on
Operational Panel to return to the Main Menu.
You cannot directly control external devices connected to AUX input.
19. CAMERA INPUT OPERATIONS
Switching to Camera mode
Touch [Camera] button on Main Menu.
The LCD will display the external camera video. The screen will display “No Video Signal” message, if a valid
camera is not connect to this head unit.
Press MENU button on Operational Panel to return to the Main Menu.
Setting Camera audio
Select “ON” button in the Camera Audio setting of the General setting.
The audio from camera will heard when back gear is on. The volume control is available but not indicated on the
screen due to the safety.
Select “MUTE” button, then mute the audio of the current mode when back gear is on.
Select “Off” button, then play the audio of the current mode then back gear is on.
Note:
If the reverse cable is connected correctly to the car, the unit goes to camera mode automatically when the car is in
reverses.
As an additional safety feature, the audio from camera with built-in microphones can be heard through
the NX405.
To Next Page
Loading...
Need help?
General
