3
Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com
INSTALLATION OF THIS PRODUCT
READ ALL THE INSTRUCTIONS CAREFULLY BEFORE INSTALLATION
WARNING: AN ACCREDITED HEATING ENGINEER MUST CARRY OUT THE
INSTALLATION OF THIS STOVE. ALTERNATIVELY, SHOULD A NON-
ACCREDITED ENGINEER UNDERTAKE THE INSTALLATION, YOUR LOCAL
BUILDING CONTROL OFFICER WILL BE REQUIRED TO APPROVE THE
COMPLETED INSTALLATION UNDER BUILDING REGULATION “J”. IT IS AN
OFFENCE UNDER UK LAW, NOT TO COMPLY WITH THIS MANDATORY
REQUIREMENT.IF THE STOVE IS NOT FITTED CORRECTLY BY AN APPROVED
PERSON, IT COULD RESULT IN A HOUSE FIRE OR CARBON MONOXIDE
POISONING.
CAUTION: The instructions cover the basic principles to ensure
satisfactory installation of the stove, although detail may need slight
modification to suit particular site conditions. In all cases the installation
must comply with current Building Regulation ‘J’, Local Authority Bye-
laws, European and National standards and any other specifications or
regulations as they affect the installation of the stove.
CAUTION: The information contained in this manual includes extracts
from the Building Regulations 2000 “Approved Document J”
(Combustion Appliances and Fuel Storage Systems), updated October
2010. This guidance information in no way replaces your responsibility
as an installer or end user to comply with the appropriate standards.
To Next Page
Loading...
Need help?
General
