Clevo W25CSV series User Manual

Disassembly
Removing and Installing the Mainboard 2 - 19
2.Disassembly
Mainboard Installation Procedure
1. Insert the mainboard by holding it at an angle and making sure that the ports are aligned with the bottom case
(Figure 14a).
2. Tighten the screws
- (Figure 14b) on the mainboard.
3. Make sure that the mainboard switch is aligned with the WLAN knob slot (Figure 14c).
4. Replace the keyboard (page 2 - 17), ODD (page 2 - 16), CPU (page 2 - 10), RAM (page 2 - 8), HDD (page 2 - 6),
and battery (page 2 - 5).
1
2
4
5
6
b.
a.
3
2
4
1
c.
6
5

1. Mainboard
•3 Screws
Figure 14
Mainboard Module
Installation
a. Insert the mainboard.
b. Tighten the screws.
c. Align the mainboard
switch with the WLAN
slot.

Clevo W25CSV series Specifications

General

Brand	Clevo
Model	W25CSV series
Category	Laptop
Language	English