Cobra GLOBE 3800 User Manual

36
INSTALLATION MANUAL GLOBE 3800
Disarm the alarm by pressing the
button on the radio control.
The turn indicators will flash four
times. (alarm memory)
The LED will switch to flashing
the alarm memory display.
Shut doors, bonnet and boot
keeping 2 windows on the same
side lowered about 10 centimeters.
Arm the alarm by pressing the
button of the radio control. Make
sure that there is nothing able to
move in the passenger
compartment.
Insert a hand into the passenger
compartment and wave it about
on a level with the front seat
headrest. The sensor is working
properly if the LED goes off at
each movement of the hand.
Arm the alarm by pressing the
button of the radio control and hit
the windows with the fist. The LED
has to goes on in a fixed way
without any changes.
Disarm the alarm by pressing the
button of the radio control and
close the windows.
Unlock a door with the key and
open it.
The siren will sound and the turn
indicators will blink.
Close the door.
Arm the alarm and repeat the test
for the other connected doors, the
bonnet and boot.
Arm the alarm by pressing the
button of the radio control.
Wait for 40 s.
VOLUMETRIC ULTRASONIC
SENSOR FUNCTIONAL TEST
Carry out the test operations in
the indicated sequence.
The test operations must be
carried out within the 40 s
inhibition phase. An alarm status
will be generated (siren and
blinker) once this time has
elapsed.
PERIMETRIC PROTECTION
FUNCTIONAL TEST
Carry out the test operations in the
indicated sequence after having shut
doors, bonnet and boot.
06DE2086A.pmd 17/01/2005, 14.3013

Cobra GLOBE 3800 Specifications

General

Brand	Cobra
Model	GLOBE 3800
Category	Car Alarm
Language	English