1
2
DESCRIPTION AND PART FUNCTIONS
Fuel Tank Cap
To open the fuel tank cap (3), Turn
the cap counter clockwise to remove.
To re-install the cap, turn the cap
clockwise until snug.
Fuel Valve operation
Fuel Cap
Fuel Valve (2): To start the engine
and run the mini bike, the fuel valve
needs to be placed in the “ON” (right)
position. This allows fuel to ow to
the carburetor.
When nished riding, and while
transporting, place fuel valve in the
“OFF” (left) position.
Choke Lever (1): If the engine is cold,
the choke can help start the engine by
placing the choke lever to the “ON” (left)
position. Once engine has warmed up
, place choke lever to the “OFF” (right)
position.
Choke operation
3
Oil Fill plug
Oil Fill Plug (5)
To check or add oil, open the oil ll
plug/dipstick by turning counter
clockwise. To tighten, turn clockwise.
4
5
Starter Recoil Cord
Starter Recoil Cord (4)
To start the engine, place the on/o
switch locate on the handlebars to
the “ON” position and pull the Starter
Recoil Cord
9
To Next Page
Loading...
Need help?
General
