The air cleaner element needs to be
cleaned or replaced periodically (see
chart for cleaning/replacement
intervals). The air lter element
will need to be cleaned more often
if Mini Bike is ridden in muddy, wet,
or dusty conditions. A clean air lter
will help the Mini Bike run at peak
performance allowing better gas
mileage, more power and will protect
the engine from the damaging ef-
fects of dirt entering the engine.
Clean air lter frequently if Mini
Bike is driven in wet, muddy or
dusty conditions.
Driving in the above conditions
without cleaning frequently can
plug up the air lter which can
cause poor gas mileage, low
power and cause damage to the
engine.
CAUTION
Air Filter
MAINTENANCE
Air lter removal,
inspection and cleaning
instructions
1, Locate the air lter assembly (1)
2. Remove the Air lter assembly
cover by removing the air lter cover
knob (2).
3. Remove the air lter element
from the assembly by removing the
wing nut (3)
3. Remove the foam element (4)
from the paper air lter element (5)
and clean foam element with mild
soap and water. Rinse and squeeze
out excess water and allow to dry .
Note: If foam element (4) is damaged,
replace.
4. Inspect the air lter paper
element (5) for dirt and damage. If
dirty, gently tap element on ground
to remove any excess debris. Gently
blow out element from the inside
with compressed air. If element is
too clogged or damaged for contin-
ued use, replace the element.
1
2
3
4
5
4
18
To Next Page
Loading...
Need help?
General
