Washing the Mini Bike
1. Wash mud and dirt o Mini Bike
with low pressure water from a hose.
Do not use high pressure nozzles,
this could allow water to enter the
engine causing damage.
2. Wash Mini Bike using a mild deter-
gent or car soap using a sponge, soft
rag or brush. Do not use any clean-
ing materials that could scratch the
surfaces.
Note: Be careful not to allow water to
enter the muer outlet, air lter intake,
brake cable, throttle cable or switches.
Transporting
1. Make sure fuel valve (1) is turned
to the OFF (left) position.
2. Drain carburetor by turning fuel
valve (1) to the o position and
opening the drain screw (2). Allow
all fuel to drain from the carburetor.
Once fuel is drained, re-tighten drain
screw (2).
Note: Make sure to drain fuel in a proper
storage container.
3. Transport the Mini Bike with the
Mini Bike in the upright position (3)
tied down securely.
1
2
3
To Next Page
Loading...
Need help?
General
