ComAp IG-NTC GC User Manual

IGS-NT-BC, SW Version 1.2.0, ©ComAp – January 2019
IGS-NT-BC-1.2.0 Reference Guide.PDF
14
AC measurement
The wiring of AC measurement depends on the type of wiring of the power lines (see Power lines wiring
paragraph above). If BCB is used following AC values are to be measured:
• Bank bus voltage, 3phase, required
• Common bus voltage, 3phase, required
• Bank current, 3phase, recommended
Following AC values are to be measured in systems without BCB:
• Bank bus voltage, 3phase, recommended
• Bank current, 3phase, optional

ComAp IG-NTC GC Specifications

General

Brand	ComAp
Model	IG-NTC GC
Category	Controller
Language	English