Maintenance and Service Guide 5–1
5
Removal and Replacement
Procedures
This chapter provides removal and replacement procedures.
Torx T8 and Phillips P0 screws are removed during disassembly.
There are 54 screws, in 8 different sizes, that must be removed,
replaced, and loosened when servicing the notebook. Make
special note of each screw size and location during removal and
replacement.
Refer to Appendix C, “Screw Listing,” for detailed information
on screw sizes, locations, and usage.
307503-003.book Page 1 Friday, April 4, 2003 3:37 PM
To Next Page
Loading...
Need help?
General