5–12 Maintenance and Service Guide
Removal and Replacement Procedures
5.6 Optical Drive
1. Prepare the notebook for disassembly (Section 5.3).
2. Turn the notebook bottom side up with the optical drive
facing you.
3. Remove the memory expansion compartment cover
(Section 5.5).
4. Remove the TM2.5 × 7.0 screw 1 that secures the optical
drive to the base enclosure (Figure 5-9).
5. Slide the optical drive out of the base enclosure 2.
Figure 5-9. Removing an Optical Drive
Reverse the preceding procedure to install the optical drive.
Optical Drive
Spare Part Number Information
24X Max CD-ROM drive
8X Max DVD-ROM drive
24X Max DVD-ROM/CD-RW combination drive
310660-001
310661-001
310662-001
307503-003.book Page 12 Friday, April 4, 2003 3:37 PM
To Next Page
Loading...
Need help?
General