Crestron RMC3 User Manual

3-Series Room Media Controller Crestron RMC3
Configure for Operations
Before setting up the RMC3, the time and time zone need to be set.
The RMC3 can also be further configured using a web browser.
Set Date and Time
1. Establish communication with the RMC3 as described in
“Establishing Communication” on page 21.
2. In Crestron Toolbox, select Functions | System Clock….
3. Set the date and time.
Online Configuration
The RMC3 can be configured using the built-in web-based setup tool.
1. Using Internet Explorer, navigate to http://xxx.xx.xx.xxx/setup
where xxx.xx.xx.xxx is the IP address of the control system.
NOTE: The web-based setup tool is only accessible from Internet
Explorer.
NOTE: If a security warning is displayed, click Install to
continue.
The control system’s splash screen is displayed.
24  Room Media Controller: RMC3 Operations & Installation Guide – DOC. 7558B

Crestron RMC3 Specifications

General

Internal memory	0.256 GB
Storage media type	Flash
Internal storage capacity	4096 GB
Product color	Black
Heat dissipation	17 BTU/h
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	10 - 90 %
Ethernet LAN (RJ-45) ports	1

Weight and Dimensions

Depth	73 mm
Width	128 mm
Height	35 mm
Weight	180 g