The Crestron® AMP-X75 is a high performance, space saving, energy
efficient amplifier that’s totally configurable, yet simple to use. Whether
installed in a rack, mounted on a wall, or placed on a table, the AMP-X75
is simple to specify and install in any configuration.
In the Box
1 AMP-X75, X-Series Amplifier, 75 W
Additional Items
4 Screw, 8-32 x 5/16 in., Flat Head, Phillips, Black (2055195)
4 Screw, 6-32 x 3/8 in., Undercut Head, Phillips (2055196)
2 Plate, Joining (2055198)
4 Foot, Adhesive, Black (2055200)
1 Fascia Plate with Tape, Quarter-Width (2058154)
1 Rack Ear, 1U, Quarter-Width (2058155)
1 Fascia Plate with Tape, Half-Width (2058156)
1 Rack Ear, 1U, Half-Width (2058157 )
1 Power cord (2055205)
1 Connector, Speaker (2055206)
2 Connector, Input (2055207)
1 Connector, 2-Pin (2003574)
Assemble
Prepare for Installation
The amplifier can be installed in a rack, mounted on a wall, or placed on
a table.
Rack Installation
Before an amplifier can be installed in a rack, rack ears must be
attached.
Single Amplifier
1. Remove the protective plastic from the adhesive strip on the rear
side of the fascia plates.
2. Press the fascia plates against the rack ears to attach them.
AMP-X75
QuickStart
X-Series Amplifier,75 W
1
To Next Page
Need help?
General
