3. Attach the rack ears to the amplifier with the four included
6-32 x 3/8 in. screws.
Ganged Amplifiers
Up to four amplifiers can be ganged together while occupying only 1 RU
of rack space. When ganged together, the amplifier assembly occupies
the entire width of the rack. When ganging together two or three
amplifiers, a combination of quarter-width and half-width rack ears and
fascia plates must be used.
1. Place the amplifiers upside-down and adjacent to each other on a
flat surface.
2. Use a Phillips screwdriver (not included) to gang the amplifiers
together with three joining plates (two are included with each
amplifier) and twelve 8-32 x 5/16 in. screws (four are included with
each amplifier).
2
AMP-X75
QuickStart
X-Series Amplifier,75 W
To Next Page
Loading...
Need help?
General
