Crown CTs Series User Manual

Operation Manual
CTs Power Amplifiers
page 28
AC Power Draw and Thermal Dissipation:
Pink noise 12dB crest factor, bandwidth limited 22Hz to 22kHz.
Typical line impedance used.
Measurements made with 120VAC mains. Line current figures for 230VAC units derived by multiplying 120VAC figures by 0.5.
Data based on all channels driven.
watts in
watts out dissapated
Btu/hr kcal/hr
At Idle
60 0 60 205 52
1/8th Power Pink Noise 8 Ohms/Ch.
600x2
Typical of program material 16 Ohms Bridge
1200
just at clip. 4 Ohms/Ch.
600x2
8 Ohms Bridge
1200
2 Ohms/Ch.
250x2
4 Ohms Bridge
500
100V/Ch. 600x2
140/200V Bridge 1200
1/3rd Power Pink Noise 8 Ohms/Ch.
600x2
Typical of program material 16 Ohms Bridge
1200
with severe clipping. 4 Ohms/Ch.
600x2
8 Ohms Bridge
1200
2 Ohms/Ch.
250x2
4 Ohms Bridge
500
70V/Ch. 600x2
140/200V Bridge 1200
CTs 1200
Load
Rated
Power
Line Current
120VAC
Line Current
230VAC
Watts
Thermal Dissipation
7.6 3.8 641 157 484 1651 416
10.0 5.0 872 151 720 2458 620
8.8 4.4 1330 405 925 3158 796
7.6 3.8 641 157 484 1651 416
11.5 5.7 996 403 593 2025 511
15.5 7.8 1372 405 967 3300 832
903
996 403 593 2025 511
1217 168 1050 358213.4 6.7
11.5 5.7
8 AC Power Draw and Thermal Dissipation

Crown CTs Series Specifications

General

Brand	Crown
Model	CTs Series
Category	Amplifier
Language	English