CycleOps Phantom series User Manual

4
Attach Seat
G
A seat has been included with the CycleOps Phantom Series indoor cycle. If desired, the indoor cycle can accommodate
an off-the-shelf seat to personalize the t, feel and ride. In some instances, a shorter seat post clamp is required for
individuals under ve feet tall. If desired, contact Saris Cycling Group to purchase the short seat clamp.
3. Attach the seat post clamp to the seat
post. Once the seat is level, properly
tighten with the small L handle.
2. Insert seat post into the seat tube
and secure it by inserting the large L
handle into the main frame assembly
on the right side of the indoor cycle
(chain guard side).
Seat post
clamp
N
Small L
handle
E
Seat post
1. Remove 6mm bolt in main frame as-
sembly using 6mm Allen wrench. The
6mm bolt can be kept in place of the
large L handle for a more permanent
placement of the seat post height.
N
M
Small L
handles
Large L
handles
Push
Rotate
7 Push black button and rotate handle
on small and large L handles to
position the handle without tightening.
Release the button and allow the
handle to seat to tighten or loosen an
adjustment.
C
Main frame
assembly
M
Large L
handle
C
Main frame
assembly
E
Seat post

CycleOps Phantom series Specifications

General

Brand	CycleOps
Model	Phantom series
Category	Exercise Bike
Language	English