CycleOps Phantom series User Manual

8
CHAPTER 5: COMMON ADJUSTMENTS
Replace Speed Sensor Battery (CycleOps Indoor Cycle Upgrade Kit)
Over time, the lithium battery in the speed sensor will need to be changed. See Preventative Maintenance for when to
replace.
1. Using a 4mm Allen wrench, remove
the three chain guard bolts and remove
the chain guard.
3. Replace the battery with a compat-
ible CR2032.
Replace Cadence Sensor Battery (CycleOps Indoor Cycle Upgrade Kit)
Over time, the lithium battery in the cadence sensor will need to be changed. See Preventative Maintenance for when to
replace.
2. Locate speed sensor next to hub.
5. Using a 4mm Allen wrench, and
three chain guard bolts, reattach the
chain guard.
4. Using the new battery, remove the
battery cover on the back of the sensor
by turning counterclockwise approxi-
mately one half turn.
2. Locate the cadence sensor inside
main frame.
1. Using a 4mm Allen wrench, remove
the three chain guard bolts and remove
the chain guard.
3. Using 4mm Allen wrench, remove
the bolt attaching the cadence sensor
(be sure to hold the cadence sensor
arm to avoid dropping the cadence
sensor in the main frame). Slide ca-
dence sensor out of the main frame.

CycleOps Phantom series Specifications

General

Brand	CycleOps
Model	Phantom series
Category	Exercise Bike
Language	English