35D-Link DCS-5010L User Manual 35
Section 4 - Conguration
Video
Video Prole:
Encode Type:
Resolution:
Bit Rate
Frame Rate:
JPEG Quality:
Default View
Mode:
Light
Frequency:
This section allows you to congure the video settings for your camera.
This section allows you to change the Resolution, Bit Rate (for H.264),
Jpeg Quality (for MJPEG), and Frame Rate (frames per second).
Displays the video compression format, either H.264 or MJPEG video.
Select the desired video resolution from three sizes: 640x480,
320x240, or 160x112. Higher settings oer better quality, but will
require more bandwidth to stream.
Select the desired Bit Rate for the video with H.264 compression.
A higher bit rate will increase image quality, but will require more
bandwidth to stream.
Select the Frame Rate (FPS) to use for the video stream. Higher settings
oer better quality, but will require more bandwidth to stream.
Select one of ve levels of image quality for MJPEG video: Highest,
High, Medium, Low, and Lowest.
Select the default compression format to use when viewing your video
on the Live Video page.
Auto is selected by default. You can select a frequency to be used,
based on the frequency of the electrical supply in your area, to help
reduce image icker.
Click Save Settings.