35D-Link DCS-936L User Manual
Section 3 - Conguration
Image Setup
This section allows you to congure the image settings for your camera.
Allows you to adjust the brightness level.
Allows you to adjust the saturation level.
Allows you to adjust the contrast level.
Allows you to adjust the sharpness level.
Changes the images recorded on the camera to be in black and white.
Horizontally ip the video.
Select this box to vertically ip the video. If the camera is installed upside
down, Flip Image and Mirror should both be checked.
Select the frequency used by your power lines to avoid camera icker
or moving bars in your video. Generally, if your power outlets are 220 to
240 V, you should select 50 Hz. If your power outlets are 100 to 120 V, you
should select 60 Hz.
Allows you to set a slow shutter speed to use. Using a slow shutter allows
you to monitor an area in low-light conditions. However, using a slow
shutter speed may make moving objects appear blurry.
Changes made to these settings will take eect immediately.
Brightness:
Saturation:
Contrast:
Sharpness:
B/W:
Mirror:
Flip:
Frequency:
Slow Shutter:
To Next Page
Need help?
General
Weight and Dimensions
