40D-Link DCS-936L User Manual
Section 3 - Conguration
Snapshot
The snapshot feature lets you send image snapshots via e-mail when a trigger is activated.
Snapshot:
Trigger By:
Snapshot Type:
Target:
Check this box to enable the Snapshot function.
Select whether to record a snapshot when triggered by Motion or Sound,
according to a Schedule, or Always record.
• Motion: Enables recording when motion is detected. You can limit
motion-triggered recording to a specic schedule by selection Only
during and entering the times you want motion-triggered recording
to be enabled.
• Schedule: Enables recording according to a schedule. Enter the times
you want the camera to record. During these times, a snapshot will be
taken every second.
• Always: This will enable continuous recording. A snapshot will be
taken every second.
• Sound: Enables recording when sound is detected. You can limit
sound-triggered recording to a specic schedule by selection Only
during and entering the times you want sound-triggered recording
to be enabled.
Select whether to take a single snapshot or to take 6 snapshots with a
selectable interval between them. Snapshots will always use Video Prole
2. For more on video prole options, refer to Audio and Video on page
36.
Select where you want the snapshot to be sent. Enter the settings for your
e-mail account.
Click Save Settings to save your changes.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
