27D-Link DCS-960L User Manual
Section 3 - Conguration
You may congure which ports to use for HTTP and RTSP access to the camera.
You may enable and congure which ports to use for HTTPS access to the camera.
Enable this setting to congure your camera as an UPnP device in the network.
Enable this to allow your camera to use UPnP to congure port forwarding on
your router. Set the HTTP, HTTPS, and RTSP ports you wish to use for UPnP port
forwarding.
Checking the Bonjour box will allow the camera to be discoverable on the
network and visible to Apple devices. Enter the name you want to use to identify
your camera on the network.
Click Save Settings to save your changes.
Port Settings:
HTTPS Settings:
UPnP Enable:
UPnP Port
Forward:
Bonjour: