D-Link DES-1005P User Manual

9
UNDERSTANDING LED INDICATORS
The front panel LEDs provides instant status feedback, and helps
monitor and troubleshoot when needed.
Figure 3. LED indicators of the Switch
System LED
LED Indicators
LED
Indicative
Color
Status
Description
Power
(per device)
Green
Solid Light
Power on
Off Light
Power off
Link/Act
(per port)
Green Solid light When there is a secure connection (or link)
to device at any of the ports.
Blinking
When there is reception or transmission
occurring at any of the ports.
Off
No link
PoE LED Indicators
Location
LED
Indicative
Color
Status
Description
PoE Port
PoE Status
Green
Solid Light
When the PoE powered
device (PD) is connected and
the port supplies power
successfully.
Green
Blinking
Overload/Short circuit
occurred. PSE will turn off
power and blink the LED 2
seconds. After 2s, LED will
be off. PSE will auto-recovery
within 5s after turn off power.
Off
Light Off
No Powered Device (PD)
connected.

D-Link DES-1005P Specifications

General

MAC address table	2000 entries
Store-and-forward	Yes
Maximum data transfer rate	0.2 Gbit/s
Supported data transfer rates	10/100 Mbit/s
10G support	No
Networking standards	IEEE 802.1p, IEEE 802.3, IEEE 802.3af, IEEE 802.3u, IEEE 802.3x
Ethernet LAN data rates	10, 100 Mbit/s
Copper ethernet cabling technology	100BASE-TX, 10BASE-T
Networking features	Fast Ethernet
Packet transfer speed	148800 pps
Switch type	Unmanaged
Switch layer	-
Power connector	DC-in jack
Basic switching RJ-45 Ethernet ports quantity	5
Power over Ethernet (PoE) ports quantity	1
Power consumption (typical)	1.8 W
Certification	RoHS, FCC, ICES-003, cUL
Product color	Black
LED indicators	Link, PoE
Mean time between failures (MTBF)	324616 h
Storage temperature (T-T)	-40 - 70 °C
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	0 - 95 %

Weight and Dimensions

Depth	85 mm
Width	140 mm
Height	28 mm