D-Link DES-1008E User Manual

ENGLISH
17
Statically Assign an IP address
If you are not using a DHCP capable gateway/router, or you need to assign a static IP address, please follow the steps below:
Step 1
Windows® 7 - Click on Start > Control Panel > Network and Internet > Network and Sharing Center > Change Adapter Setting.
Windows Vista® - Click on Start > Control Panel > Network and Internet > Network and Sharing Center > Manage Network Connections.
Windows® XP - Click on Start > Control Panel > Network Connections.
Windows® 2000 - From the desktop, right-click My Network Places and select Properties.
Step 2
Right-click on the Local Area Connection which represents your network adapter and select Properties.
Step 3
Highlight Internet Protocol (TCP/IP) and click Properties.
Step 4
Click Use the following IP address and enter an IP address that is on the same subnet as your
network or the LAN IP address on your router.
Example: If the router´s LAN IP address is 192.168.0.1, make your IP address 192.168.0.X where
X is a number between 2 and 99. Make sure that the number you choose is not in use on the
network. Set Default Gateway the same as the LAN IP address of your router (192.168.0.1).
Set Primary DNS the same as the LAN IP address of your router (192.168.0.1). The Secondary
DNS is not needed or you may enter a DNS server from your ISP.
Step 5
Click OK twice to save your settings.

D-Link DES-1008E Specifications

Data Transfer

switching fabric	1.6 Gbps
data transfer rate (Ethernet, half duplex)	10 Mbps
data transfer rate (Ethernet, full duplex)	20 Mbps
data transfer rate (Fast Ethernet, half duplex)	100 Mbps
data transfer rate (Fast Ethernet, full duplex)	200 Mbps

Power

DC input	5V/1.2A
power consumption (standby, DC input)	0.6 watts
power consumption (standby, AC input)	1.4 watts
power consumption (maximum, DC input)	3.3 watts
power consumption (maximum, AC input)	5.2 watts

Operating Environment

operating temperature	32 to 122 ˚F (0 to 50 ˚c)
storage temperature	14 to 158 ˚F (-10 to 70 ˚c)
operating humidity	10% to 90% RH Non-Condensing
storage humidity	5% to 90% RH Non-Condensing

Heat Dissipation

heat dissipation (standby, AC input)	4.774 BTU/h
heat dissipation (maximum, AC input)	17.732 BTU/h

Weight and Dimensions

device dimensions (W x D x H)	6.5” x 4.4” x 1.5” (164.5 x 111.5 x 36.0 mm)